SpecStrip
Reactive form release agent
is a chemically reactive, mineral oil base, concrete release agent specially engineered to positively prevent bonding of the concrete to forms and form liners. SpecStrip contains no waxes or silicones.
- Improves release of formwork
- Reduces concrete buildup on formwork and liners
- Reduces cleaning of formwork
- Protects formwork against rust
- Leaves no residue, stain or discoloration
- Helps reduce dusting of concrete
Application
- Storage: Keep in the original, tightly sealed containers. Avoid water, dirt, or other contaminants.
- Coverage: SpecStrip is ready-to-use and should not be diluted. Ensure form surfaces are free of dirt, rust, scale, and concrete buildup before application. Recommended application rates vary based on surface type, from 2000 sq ft/gal for steel, plastic, and fiberglass to 1000 sq ft/gal for dimensional lumber and BB grade plywood. Spray application is advised for optimal coverage and economy.
- Spraying Instructions: Use an atomizing or misting spray tip for a thin, uniform film. Avoid over-application to prevent dusting. Remove any excess material or puddles promptly.
- After Application: When applied correctly, SpecStrip leaves a smooth, architectural concrete surface ready for coatings, without any residue or staining. Follow coating manufacturer’s recommendations for surface preparation.
Packaging
SpecStrip is available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.
Shelf Life
When stored properly, SpecStrip has a shelf life of two years from the manufacturing date.
Standards
- Performs well in cold temperatures, significantly reduces surface voids in concrete, and extends the lifespan of wood forms.
- Complies with VOC emission standards for form releases (< 250 g/L).
- Meets specifications including Corps of Engineers CEGS-03300 and Navy Dock and Piers 56359.
Documents
SpecStrip - Flyer