PRODUCT SYSTEMS
-
1
Season: Form Seasoning WB
Form Seasoning WB is a water-based treatment for new aluminum forms. It oxidizes the elemental aluminum on the surface of new aluminum forms to properly season and prepare them for use.
-
2
Prevent: SpecStrip
SpecStrip is a chemically reactive release agent specially engineered to positively prevent bonding of the concrete to forms and form liners.
-
3
Release: TriAct
TriAct is a concentrated, highly-reactive petroleum mixture that, when properly diluted, can be used as a reactive form release agent, an aluminum form "seasoning" agent, and a softener and maintenance coating.
-
4
Remove: SpecBlast
A chemically reactive liquid formulated to soften and remove concrete buildup from concrete tools and equipment. SpecBlast is designed to help avoid the damaging effects of sandblasting, bushhammering, and jackhammering hardened concrete from equipment.
-
1
Prime: SpecPoxy 1000
A two-component, low-viscosity, moisture insensitive, high modulus, structural epoxy bonding adhesive and crack injection resin. SpecPoxy 1000 is 100% solids, solvent-free, low odor, and high-strength.
-
2
Level: SpecLevel PCT-AGG
A cement-based, self-leveling polishable concrete topping designed for interior and exterior use. SpecLevel PCT produces a dense hard surface that can be diamond polished in as little as 24 hours.
-
3
Densify: LithSeal or SpecHard
A premium lithium-silicate sealer/densifier for concrete surfaces that deeply penetrates and reacts with cured concrete. Treated surfaces will remain breathable, reduce porosity, reduce dusting, reduce water permeability, and increase abrasion resistance.
-
4
Polish: SpecGuard
SpecGuard is a multi-component, water-based polymeric protectant that improves the appearance and durability of concrete floors. SpecGuard incorporates a cross-linking nano-technology, which aids penetration and adhesion creating a tough, stain-resistant coating.
-
+
For existing concrete, clean & strip using Orange Peel before steps 3-4.
An innovative solution for the toughest industrial applications. Effectively remove grease, grime, and other contaminants from architectural concrete and other surfaces. VOC compliant with a pleasant citrus odor.
-
1
SpecFilm
When sprayed over fresh concrete, SpecFilm forms a thin, continuous film which prevents rapid moisture loss from the concrete surface.
-
2
Pave Cure CW
When properly applied, Pave Cure CW forms a continuous membrane that controls curing for strong and durable concrete.
-
1
Precast 80
A chemically active, fast-drying release agent specially engineered to positively prevent bonding of the concrete to forms in precast and shop use applications.
-
2
Tricast
TriAct is a concentrated, highly-reactive petroleum mixture that, when properly diluted, can be used as a reactive form release agent, an aluminum form "seasoning" agent, and a softener and maintenance coating.
-
3
Final Finish
A single-component, rapid-hardening, polymer-modified concrete resurfacing mortar for smoothing, resurfacing, rubbing, and restoring concrete surfaces.
-
4
SpecPatch
A general-purpose polymer-modified, concrete repair mortar for concrete floors, walls, precast, tilt-up, and masonry surfaces.
-
1
SpecPrep
Provides an anticorrosion, protective coating for steel rebar in concrete restoration.
-
2
RepCon Repair Mortar
A single component, polymer-modified fiber-reinforced, rapid-setting concrete repair mortar with corrosion inhibitor.
-
1
Prevent: SpecFilm
SpecFilm is designed to be used as an evaporation retardant and finishing aid on concrete flatwork of all types. When sprayed over fresh concrete, SpecFilm forms a thin, continuous film which prevents rapid moisture loss from the concrete surface.
-
2
Lift: SpecTilt WB
SpecTilt WB is a chemically reactive tilt-up cure and bond breaker specially engineered to provide a clean, easy lift of tilt-up panels.
-
3
Clean: Orange Peel
Orange Peel concentrate is a cost effective, natural citrus solvent, cleaner, and degreaser. Orange Peel is an innovative cleaning solution for the toughest industrial applications.
-
4
Seal: SpecHard
SpecHard is a proprietary, colorless chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle traffic. SpecHard penetrates concrete surfaces to seal, densify, and harden.
-
5
Fill: Rapid Flex CJ or SpecPoxy CJ
Our control joint fillers are both engineered to offer strength and protection for your control and construction joints in industrial concrete floors. Both are two-component products, coming in a semi-rigid epoxy or a rapid-curing, fast-setting polyurea.