All Shield SB
Modified Oleophobic Penetrating Concrete Protectant
All Shield SB s a solvent-based, synthetic- modified, silane-siloxane concrete protectant. This clear, penetrating, breathable protectant is designed for use on interior/exterior, horizontal/vertical concrete, natural or synthetic stone surfaces to resist oil, water, food stains, and many other liquid contaminants.
- Excellent oil, water and stain repellent for interior/ exterior surfaces subjected to motor oil, de-icing salts and other damaging contaminants.
- Reduces water penetration minimizing the effects of freeze-thaw and weathering on concrete structures
- Long-lasting protection for new as well as old concrete and stone surfaces
- Dries quickly, tack-free and skid-resistant
- Colorless and non-yellowing
- USDA accepted for indirect food contact

Application
All Shield SB can be applied to horizontal and vertical surfaces using a low-pressure sprayer (non-atomizing, under 50 psi), roller, or brush. For smooth and polished surfaces, a microfiber applicator is recommended.
- New Concrete: Ensure the surface is dry and fully cured (minimum 21 days). Remove any moisture, curing residue, oil, or debris before application.
- Old Concrete and Masonry: Clean surfaces thoroughly using SpecChem Orange Peel or Berry Clean. Ensure the substrate is dry and absorptive before applying the product.
Coverage:
- Porous surfaces: 150-200 ft²/gal
- Light broom finish: 200-400 ft²/gal
- Smooth/medium trowel: 400-500 ft²/gal
- Dense/polished concrete: 800-1200 ft²/gal
A test area is recommended to verify coverage and compatibility.
Packaging
Available in 55-gallon drums, 5-gallon pails, and 1-gallon cans (6 per case).
Shelf Life
All Shield SB has a shelf life of 24 months when stored in unopened containers in a clean, dry environment between 45°F and 85°F. Protect from freezing.
Coverage
- Porous surfaces: 150-200 ft²/gal
- Light broom finish: 200-400 ft²/gal
- Smooth/medium trowel: 400-500 ft²/gal
- Dense/polished concrete: 800-1200 ft²/gal
Uses
Ideal for protecting a variety of surfaces, including:
- Commercial and industrial floors
- Vehicle repair and service facilities
- Pavements, driveways, and parking structures
- Brick and concrete pavers
- Marine platforms and bridges
Test Data
Stain Resistance (ASTM D-1308M):
Tested on concrete treated with All Shield SB, the following performance ratings were observed after various exposure times:
- Excellent (E): No adverse effects.
- Good (G): Limited adverse effects.
- Fair (F): Moderate adverse effects.
- Poor (P): Unsatisfactory results.
Standards
- USDA accepted for indirect food contact.
- UV resistant.
Cleaning
For regular maintenance, use clean water or a pressure washer to remove surface stains. For stubborn stains, dilute SpecChem Orange Peel or Berry Clean with water (1:3 ratio). Avoid strong solvents or oil-based cleaners that may leave residue.