Cure & Seal WB 25 
25% solids water-based cure & seal
Cure & Seal WB 25 is a high solids water-based, nonyellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. This low-odor, water-based formulation is ideal for interior
or exterior use.
- Creates a tough, glossy film resistant to abrasion and common stains.
- Prevents adhesion of cementitious droppings and penetration of most oils and greases.
- Reduces maintenance and cleanup costs, brightening floors.
- May be recoated at any time without stripping the prior application

Application
- Ready to use without dilution. Recommended application tools include a sprayer, brush, roller, or microfiber applicator for best results.
- Avoid creating puddles and apply according to the recommended coverage rates.
- Application temperature should be above 40°F and rising.
Concrete Conditions:
- New Concrete: Apply after the surface water has evaporated without damaging the concrete surface. A second coat enhances finish and protection.
- Existing Concrete: Ensure the surface is clean and free from stains, oil, grease, dirt, and incompatible coatings before application.
Packaging
Available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.
Shelf Life
One-year shelf life in original, tightly closed containers. Protect from freezing and contamination.
Coverage
- Curing: 300 sq ft/gal
- Dustproofing and Sealing: 300-500 sq ft/gal for new concrete and 400-600 sq ft/gal for aged concrete.
Standards
- Meets ASTM C-309, Type I, Class A & B, and ASTM 1315, Type 1, Class A standards. Complies with VOC emissions requirements, with an actual VOC content of 98 g/L.
- Meets SCAQMD VOC requirements and is USDA accepted.
Cleaning
Clean application equipment with water before the product dries; use xylene or other approved solvents for dried product.