SpecChem > Products > Decorative & Protective Sealers > SC Multi-Purpose Sealer

SC Multi-Purpose Sealer

Clear non-yellowing water-based acrylic sealer

SC Multi-Purpose Sealer is a clear, water-based acrylic sealer that is non-yellowing and designed to protect and enhance a variety of interior and exterior surfaces. Its applications include decorative concrete, pavers, exposed aggregate, natural stone, brick, quarry tile, terrazzo, and more. This durable, easy-to-apply sealer provides a medium gloss, satin sheen, enhancing the appearance of all treated surfaces. It is especially effective in protecting against the damaging effects of de-icing salts and acts as a binder to minimize aggregate pop out. This sealer also offers stain resistance against water, oil, grease, and acids, and is ideal for sealing interlocking and brick pavers, helping to lock sand in place.

  • Offers excellent resistance to staining, repelling oil and grease.
  • Seals pavers effectively, locking sand in place and providing protection.
  • Resists mold, mildew, algae, and weed growth.
  • May qualify for LEED credits.
  • Cleans up easily with water.
  • Reduces efflorescence, fading, and freeze-thaw damage.

Tech Sheet
Safety Sheet
Sell Sheet


For New Concrete and Exposed Aggregate

  • Apply with a sprayer or roller in a uniform thin film. For optimal results, spray application is recommended. SC Multi-Purpose Sealer requires only one coat to cure, seal, beautify, and protect.
  • For increased gloss, especially on porous substrates, a second thin coat may be applied after the first coat has dried thoroughly, typically within 6 – 8 hours.

For Existing Concrete

  • The concrete surface must be clean, dry, and free from all stains, oil, grease, dirt, and incompatible coatings before application.

Application Conditions

  • Ready-to-use. Do not dilute.
  • Apply at temperatures above 40°F and rising for best results.


Available in 5-gallon pails and 1-gallon jugs (6 to a case).

Shelf Life

Two years from the date of manufacture when stored properly in original tightly sealed containers.


Suitable for a wide range of interior and exterior applications including water sealing and protection of decorative, stamped, colored, and hard troweled concrete, as well as pavers, slate, flagstone, quarry tile, brick, terrazzo, and exposed aggregate.


VOC content is less than 100 g/L, complying with federal VOC standards for curing and sealing compounds.


Clean application equipment with water if the product has not dried. For dried product, use xylene or other approved solvents.