Cure Shield

Cure Shield

Cure Shield is a solvent-based blend of silane and pure acrylic copolymers designed to cure, seal, harden, and dustproof freshly placed concrete while providing additional protection to existing concrete surfaces. It offers a non-yellowing, clear film that effectively cures and protects concrete, enhancing its resistance to spalling and deterioration caused by de-icing salts. Cure Shield is unique in its ability to be applied to fresh concrete and meets ASTM C309 and 1315 curing standards.

  • Cures and protects fresh concrete
  • Protects against spalling and deterioration caused by deicing salts
  • Non-yellowing
  • Highly resistant to moisture and salt
  • Ready to use

Coverage

  • Curing Fresh Concrete: 200 – 250 sq ft / gal
  • Existing Concrete : 200 – 300 sq ft / gal
  • Increase coverage rate on broom or rough-finished concrete to account for greater surface area.

Packaging

  • 55 gallon drums
  • 5 gallon pails

Shelf Life

Shelf life of CureShield in the original tightly closed containers is two years from the date of manufacture. Do not allow the accumulation of water, dirt, or other contaminants.

Standards

Meets ASTM C 309/1315 Type 1, Class A. curing standards, Cure Shield meets VOC emission requirements for curing and sealing compounds (EPA limit < 700 g/L).

  • New Concrete: Should be applied as soon as the surface water has disappeared and the concrete can be worked on without being marred. Apply in a uniform coat, avoiding puddles.
  • Existing Concrete: The surface must be clean, dry, or slightly damp and free from stains, oil, grease, dirt, and other contaminants to ensure proper adhesion and penetration.
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)

Coverage

  • Curing Fresh Concrete: 200 – 250 sq ft / gal
  • Existing Concrete : 200 – 300 sq ft / gal
  • Increase coverage rate on broom or rough-finished concrete to account for greater surface area.

Packaging

  • 55 gallon drums
  • 5 gallon pails

Shelf Life

Shelf life of CureShield in the original tightly closed containers is two years from the date of manufacture. Do not allow the accumulation of water, dirt, or other contaminants.

Standards

Meets ASTM C 309/1315 Type 1, Class A. curing standards, Cure Shield meets VOC emission requirements for curing and sealing compounds (EPA limit < 700 g/L).

  • New Concrete: Should be applied as soon as the surface water has disappeared and the concrete can be worked on without being marred. Apply in a uniform coat, avoiding puddles.
  • Existing Concrete: The surface must be clean, dry, or slightly damp and free from stains, oil, grease, dirt, and other contaminants to ensure proper adhesion and penetration.
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)