IntraFilm

IntraFilm

IntraFilm is an advanced colloidal silica concrete finishing aid that enhances the finishing process of concrete surfaces and extends workability under challenging conditions such as extreme temperatures, wind, or low humidity. IntraFilm is engineered to facilitate a smoother, more efficient finishing process, and to improve the durability and lower the maintenance needs of concrete slabs by reacting during the concrete’s hydration phase.

  • Extends the workability of the concrete surface in hot, humid, dry, and windy conditions.
  • Minimizes wear on trowels and equipment due to its lubricating properties.
  • Improves impact and abrasion resistance.
  • Helps maintain moisture in the slab, reducing curling and shrinkage.
  • Contains low VOC content (<50 g/L), reducing environmental impact.
  • Facilitates easier finishing with silica fume, Type 1L cement, and air-entrained concrete mixes.

Coverage

  • Evaporation Reducer/Finishing Aid: 500 to 1000 sq-ft/gal
  • Concrete Densifier: 250 to 500 square feet per gallon
  • Coverage rates are provided as a guideline only. Many factors including surface texture, porosity, and weather conditions will determine actual coverage rates.

Packaging

  • 275 gallon totes
  • 55 gallon drums
  • 5 gallon pails
  • 1 gallon jugs (4-1 gal per case)

Shelf Life

Shelf life of INTRAFILM in the original tightly closed containers is two years from date of manufacture.

Standards

  • VOC Compliant
  • South Coast Air Quality Mgmt District Compliant
  • USDA accepted

IntraFilm is ideal for use during the floating and troweling stages of concrete placement. For application, utilize a clean, hand-pump, tank-type sprayer equipped with a low-pressure tip to evenly distribute the product. A light mist of IntraFilm should be applied over the surface intended for treatment, followed by immediate commencement of screeding, floating, troweling, or any other finishing process.

IntraFilm comes in both a ready-to-use formula and a concentrate that should be diluted with water (1 part concentrate to 4 parts clean, potable water), stirred or shaken vigorously to ensure a uniform mix.

Composition and Materials A colloidal silica-based mineral dispersion in water
Appearance Milky white liquid
VOC Compliant < 50 g/L
Product pH 8.0–9.0
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)

Play

Coverage

  • Evaporation Reducer/Finishing Aid: 500 to 1000 sq-ft/gal
  • Concrete Densifier: 250 to 500 square feet per gallon
  • Coverage rates are provided as a guideline only. Many factors including surface texture, porosity, and weather conditions will determine actual coverage rates.

Packaging

  • 275 gallon totes
  • 55 gallon drums
  • 5 gallon pails
  • 1 gallon jugs (4-1 gal per case)

Shelf Life

Shelf life of INTRAFILM in the original tightly closed containers is two years from date of manufacture.

Standards

  • VOC Compliant
  • South Coast Air Quality Mgmt District Compliant
  • USDA accepted

IntraFilm is ideal for use during the floating and troweling stages of concrete placement. For application, utilize a clean, hand-pump, tank-type sprayer equipped with a low-pressure tip to evenly distribute the product. A light mist of IntraFilm should be applied over the surface intended for treatment, followed by immediate commencement of screeding, floating, troweling, or any other finishing process.

IntraFilm comes in both a ready-to-use formula and a concentrate that should be diluted with water (1 part concentrate to 4 parts clean, potable water), stirred or shaken vigorously to ensure a uniform mix.

Composition and Materials A colloidal silica-based mineral dispersion in water
Appearance Milky white liquid
VOC Compliant < 50 g/L
Product pH 8.0–9.0
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)

Play