Max-A-Seal Asphalt Paint is a quick-drying, high-gloss, bituminous, corrosion-resistant asphalt paint that offers one-coat coverage with full resistance to water, acids, alkalis, electrolysis, and natural elements. This product is NSF/ANSI 61 approved for use with potable water systems and meets Federal Specification TTC-494 Types I, II, and III, and AASHTO M 190.
Packaging
Shelf Life
Shelf life of MAX-A-SEAL ASPHALT PAINT in the original, tightly closed container is 1 year from the date of manufacture. Do not store at temps exceeding 110° F
Standards
Max-A-Seal Asphalt Paint must be applied to a clean, dry surface free of foreign matter. The material can be applied by brush, heavy nap roller, or spray equipment at a recommended minimum wet mil thickness of 5 mils at 250-300 ft²/gal. It dries within an hour and can be recoated or backfilled within 5 hours at 70°F. The product can be sprayed using a Graco GH833 Siphon Pump, 1/2” hose, Blue Texture Spray gun, and a GHD 661 Spray Tip, among other comparable brand spraying equipment. Material should remain dry until it has fully cured.
| Appearance | Glossy Black |
| Solids (%) | >70% by weight (ASTM C1250) |
| Density | 7.5 lbs/gal |
| Viscosity SFS @ 122°F | 135 cps |
| Application Methods | Airless spray, brush |
| Cure/Backfill Time | 5 hours |
| Dry Time | 1 hour |
| Application Temperature Range | 35°F and above |
| Flash Point | 110°F (ASTM D92) |
Packaging
Shelf Life
Shelf life of MAX-A-SEAL ASPHALT PAINT in the original, tightly closed container is 1 year from the date of manufacture. Do not store at temps exceeding 110° F
Standards
Max-A-Seal Asphalt Paint must be applied to a clean, dry surface free of foreign matter. The material can be applied by brush, heavy nap roller, or spray equipment at a recommended minimum wet mil thickness of 5 mils at 250-300 ft²/gal. It dries within an hour and can be recoated or backfilled within 5 hours at 70°F. The product can be sprayed using a Graco GH833 Siphon Pump, 1/2” hose, Blue Texture Spray gun, and a GHD 661 Spray Tip, among other comparable brand spraying equipment. Material should remain dry until it has fully cured.
| Appearance | Glossy Black |
| Solids (%) | >70% by weight (ASTM C1250) |
| Density | 7.5 lbs/gal |
| Viscosity SFS @ 122°F | 135 cps |
| Application Methods | Airless spray, brush |
| Cure/Backfill Time | 5 hours |
| Dry Time | 1 hour |
| Application Temperature Range | 35°F and above |
| Flash Point | 110°F (ASTM D92) |