SC Cure 500

SC Cure 500

SC Cure 500 is a leading-edge technology, concrete curing compound that was developed to cure hard-troweled concrete to be treated with a lithium silicate hardener/densifiers like LithSeal SC.

SC Cure 500 penetrates and forms a temporary membrane to cure, densify, harden, and dustproof concrete essential for proper strength development.

  • Will not inhibit adhesion of secondary coatings, topping, or adhesives designed for concrete
  • Compatible with integrally colored concrete
  • Sealer/Densifiers can be applied in 5-7 days
  • Non-yellowing, will not stain or alter natural color concrete
  • Certified for use to cure potable water structures

Coverage

  • Hard Troweled Finish: 500-600 sq ft / gal
  • Broom or Float Finish: 300-400 sq ft / gal
  • Vertical Surface: 400-500 sq ft / gal

Packaging

  • 55 gallon drums
  • 5 gallon pails

Shelf Life

Shelf life of SC CURE 500® in the original tightly closed containers is two years from the date of manufacture. Do not allow accumulation of water, dirt or other contaminates.

Standards

  • USDA accept for indirect food contact

Extend application rate to 800-1000 sq-ft per gal on extremely hard trowelled, burnished concrete floors (ie Wal Mart, Kohl’s etc) The above rates are approximate. Exact coverage depends upon the porosity of the concrete as well as the job requirements.

Place concrete, finish, cut control joints and thoroughly remove all saw cutting residue before application.

Spray apply in a fine mist and immediately spread with a microfiber applicator pad. Keep floor wet for approx. 5 min. Over-application and puddling may leave a clear-milky membrane which can be removed with a stiff broom, screen or flushing the surface with water and
scrubbing. Spraying and spreading with applicator pad provides superior results. Application temperatures 40F to 90F.

Specific Gravity 1.03
Active Content 7%
VOC Content 0 g/L
Freeze Point 32°F
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)

Coverage

  • Hard Troweled Finish: 500-600 sq ft / gal
  • Broom or Float Finish: 300-400 sq ft / gal
  • Vertical Surface: 400-500 sq ft / gal

Packaging

  • 55 gallon drums
  • 5 gallon pails

Shelf Life

Shelf life of SC CURE 500® in the original tightly closed containers is two years from the date of manufacture. Do not allow accumulation of water, dirt or other contaminates.

Standards

  • USDA accept for indirect food contact

Extend application rate to 800-1000 sq-ft per gal on extremely hard trowelled, burnished concrete floors (ie Wal Mart, Kohl’s etc) The above rates are approximate. Exact coverage depends upon the porosity of the concrete as well as the job requirements.

Place concrete, finish, cut control joints and thoroughly remove all saw cutting residue before application.

Spray apply in a fine mist and immediately spread with a microfiber applicator pad. Keep floor wet for approx. 5 min. Over-application and puddling may leave a clear-milky membrane which can be removed with a stiff broom, screen or flushing the surface with water and
scrubbing. Spraying and spreading with applicator pad provides superior results. Application temperatures 40F to 90F.

Specific Gravity 1.03
Active Content 7%
VOC Content 0 g/L
Freeze Point 32°F
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)