SpecPoxy 3000

SpecPoxy 3000

SpecPoxy 3000 is a two-component, moisture-insensitive, high-modulus structural epoxy bonding gel. This product is 100% solids, solvent-free, low-odor, high-strength, and non-sag, suitable for anchoring and bonding in construction applications. Its VOC content is 0 grams per liter, emphasizing its environmental safety.

  • Extended working time, allowing for careful application.
  • Pick-proof sealant, ideal for security-sensitive environments.
  • ASTM 881 compliant, high-modulus, gel-viscosity epoxy.
  • Suitable for a variety of substrates, providing flexibility in application.

Packaging

  • 10 gallon units
  • 2 gallon units
  • 1 gallon unit
  • 22 oz. dual cartridge

Shelf Life

Store SpecPoxy 3000 in its original containers and keep tightly closed. Do not allow the accumulation of water, dirt or other contaminants. The shelf life of properly stored SpecPoxy 3000 is two years from date of manufacture.

Standards

  • SpecPoxy 3000 meets ASTM C881 & AASHTO M 235, Type I, II, IV, and V Grade 3, Class B & C.
  • Anchoring bolts, dowels, and reinforcing steel.
  • Vertical and overhead structural bonding and patching.
  • Sealing cracks and setting injection ports.
  • Suitable for use in concrete, block, brick, or stone.

Mixing Instructions

  • Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
  • Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.

Surface Preparation

  • Surfaces must be clean and structurally sound.
  • Remove contaminants by sandblasting, mechanical abrasion, or hydroblasting.
  • Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.

Application Techniques

  • Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
  • Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.
Initial Cure 24 hours
Final Cure 7 days
Compressive Strength
ASTM D695		 11,230 psi
Compressive Modulus
ASTM D695		 326,500 psi
Bond Strength
ASTM 882		 2 days: 2,460 psi
14 days: 3,280 psi
Elongation
ASTM D638		 1.3%
Tensile Strength
ASTM D638		 7,210 psi
Water Absorption
ASTM D570		 <0.5%
Heat Deflection
ASTM D648		 133°F
Mix Ratio 1 to 1
Viscosity Gel/Paste
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)

Packaging

  • 10 gallon units
  • 2 gallon units
  • 1 gallon unit
  • 22 oz. dual cartridge

Shelf Life

Store SpecPoxy 3000 in its original containers and keep tightly closed. Do not allow the accumulation of water, dirt or other contaminants. The shelf life of properly stored SpecPoxy 3000 is two years from date of manufacture.

Standards

  • SpecPoxy 3000 meets ASTM C881 & AASHTO M 235, Type I, II, IV, and V Grade 3, Class B & C.
  • Anchoring bolts, dowels, and reinforcing steel.
  • Vertical and overhead structural bonding and patching.
  • Sealing cracks and setting injection ports.
  • Suitable for use in concrete, block, brick, or stone.

Mixing Instructions

  • Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
  • Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.

Surface Preparation

  • Surfaces must be clean and structurally sound.
  • Remove contaminants by sandblasting, mechanical abrasion, or hydroblasting.
  • Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.

Application Techniques

  • Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
  • Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.
Initial Cure 24 hours
Final Cure 7 days
Compressive Strength
ASTM D695		 11,230 psi
Compressive Modulus
ASTM D695		 326,500 psi
Bond Strength
ASTM 882		 2 days: 2,460 psi
14 days: 3,280 psi
Elongation
ASTM D638		 1.3%
Tensile Strength
ASTM D638		 7,210 psi
Water Absorption
ASTM D570		 <0.5%
Heat Deflection
ASTM D648		 133°F
Mix Ratio 1 to 1
Viscosity Gel/Paste
Data Sheets

Download Technical Data Sheet

Download Safety Data Sheet

Download Technical Data Sheet (Spanish)