SpecChem > Products > Specialty Epoxies > SpecPoxy 3000

SpecPoxy 3000 Green Conscious Product

ASTM 881 compliant hi-mod, gel viscosity epoxy

SpecPoxy 3000 is a two-component, moisture-insensitive, high-modulus structural epoxy bonding gel. This product is 100% solids, solvent-free, low-odor, high-strength, and non-sag, suitable for anchoring and bonding in construction applications. Its VOC content is 0 grams per liter, emphasizing its environmental safety.

  • Extended working time, allowing for careful application.
  • Pick-proof sealant, ideal for security-sensitive environments.
  • ASTM 881 compliant, high-modulus, gel-viscosity epoxy.
  • Suitable for a variety of substrates, providing flexibility in application.
Tech Sheet
Safety Sheet
Spanish Tech Sheet

Application

  • Anchoring bolts, dowels, and reinforcing steel.
  • Vertical and overhead structural bonding and patching.
  • Sealing cracks and setting injection ports.
  • Suitable for use in concrete, block, brick, or stone.

Mixing Instructions

  • Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
  • Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.

Surface Preparation

  • Surfaces must be clean and structurally sound.
  • Remove contaminants by sandblasting, mechanical abrasion, or hydroblasting.
  • Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.

Application Techniques

  • Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
  • Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.

Packaging

  • Available in 1 gallon units, 2 gallon units, 10 gallon units, and 22 oz. dual cartridges.

Shelf Life

  • Store in original, tightly closed containers. Shelf life is two years from the date of manufacture when stored properly.

Test Data

  • Initial Cure: 24 hours
  • Final Cure: 7 days
  • Compressive Strength (ASTM D695): 11,230 psi
  • Compressive Modulus (ASTM D695): 326,500 psi
  • Bond Strength (ASTM 882): 2 days – 2,460 psi; 14 days – 3,280 psi
  • Elongation (ASTM D638): 1.3%
  • Tensile Strength (ASTM D638): 7,210 psi
  • Water Absorption (ASTM D570): <0.5%
  • Heat Deflection (ASTM D648): 133°F
  • Mix Ratio: 1 to 1
  • Viscosity: Gel/Paste