SpecStrip WB

Reactive water-based form release agent

SpecStrip WB is a reactive water-based release agent that is effective with all types of concrete forms. It ensures easy release of forms, minimizing the number of bugholes. This product is safe for use with styrene bead or form liners and leaves a protective coating on steel forms that inhibits rust. It may also contribute to LEED credits.

  • Enhances formwork release, reducing concrete buildup
  • Minimizes the need for cleaning formwork and liners
  • Protects formwork against rust
  • Leaves no residue, stain, or discoloration
  • VOC compliant, with a content of less than 100 g/L

Tech Sheet
Safety Sheet
Spanish Tech Sheet

Application

  • Ensure form surfaces are free of dirt, rust, scale, and concrete buildup prior to application.
  • SpecStrip WB is ready to use and should not be diluted.
  • Recommended to apply using a spray with an atomizing or misting tip to ensure thin, uniform films, maximizing performance and efficiency.
  • Typical coverage rates for various materials (Steel, Plastic, Fiberglass, Conditioned Aluminum, HDO Plywood, MDO Plywood, Dimensional Lumber, BB Grade Plywood) are about 1000 sq ft/gal.
  • Remove excess material or puddles with a squeegee and absorbent rags to avoid dusting.

Packaging

Available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.

Shelf Life

One year from the date of manufacture when stored in the original tightly closed containers.

Standards

Meets national VOC emission requirements for form releases in OTC and SCAQMD.