Surface Shine HS
Surface Shine HS is a durable, high-gloss acrylic sealer that enhances and protects concrete surfaces while resisting yellowing, abrasion, and chemical impacts.
Surface Shine HS is a high-solids, high-gloss, non-yellowing acrylic polymer designed as a cure and seal for exterior surfaces including exposed aggregate, natural stone, brick, quarry tile, terrazzo, and concrete. It is equally effective for interior use. This durable sealer enhances the appearance of all treated surfaces by providing a high gloss finish.
- Enhances and protects stamped concrete, acid-stained concrete, integrally colored concrete, and exposed aggregate.
- Reduces efflorescence.
- Shields sealed surfaces from the harmful effects of deicing salts and acid rain.
- Offers resistance to abrasion and a broad spectrum of chemicals and oils.
- Remains clear without yellowing under extreme UV exposure.
- Serves as a binder to minimize aggregate pop-out.
Application
Surface Preparation: The concrete surface must be clean and devoid of any standing water. Any existing sealer or other materials that might inhibit the adhesion of Surface Shine HS should be removed.
Application Instructions:
- For Fresh Concrete: Apply uniformly by spraying or rolling at 350-400 sq ft per gallon. The product can be applied using a handheld pump-up sprayer or an airless industrial sprayer. For roller application, use a short-nap solvent-resistant sleeve to prevent air bubbles. For an extra high gloss or on porous surfaces, a second thin application may be applied the following day at 400 sq ft per gallon. Two thin coats generally yield a better gloss than one thick coat.
- For Existing Concrete: Ensure the surface is clean, dry, and free of stains, oil, grease, dirt, and incompatible coatings before application.
Packaging
Packaging: Available in 55-gallon drums and 5-gallon pails.
Shelf Life
Surface Shine HS has a shelf life of two years from the date of manufacture, in its original, tightly closed containers. Avoid contamination with water, dirt, or other foreign substances.
Coverage
Coverage:
- Concrete: 200 – 400 sq ft per gallon
- Exposed aggregate: 200 – 300 sq ft per gallon
- Brick, stucco, etc.: 200 – 300 sq ft per gallon
Standards
Standards Compliance:
- Meets ASTM C-1315-95, Type I
- V.O.C. Content: Less than 700 g/L
- Complies with Federal V.O.C. standards for curing and sealing compounds. Do not dilute or thin the product.
Cleaning
Application equipment should be cleaned immediately using xylene or another approved solvent.