Versa Etch Extender

Versa Etch Extender is a VOC-compliant, water-based coating designed for use with Versa Etch Surface Retarders. When properly applied, it extends the removal time of Versa Etch, helping to create a uniform etched surface. Compatible with all Versa Etch surface retarder depths, it is ideal for managing the timing of concrete surface finishing.

Extends the removal time of Versa Etch, allowing for better control over the final surface appearance.
Water-based formula, VOC compliant, safe for use in regulated areas.
Easy, ready-to-use, single-step application.
Dries in approximately 4 hours at 70°F (may vary based on temperature and humidity).

Application

Versa Etch Extender should be applied immediately after the Versa Etch Surface Retarder has dried. It is removed along with the Versa Etch Surface Retarder. A spray application is preferred, with recommended temperatures above 40°F. For best results, ensure the application area is clean, and use a garden hose with a stiff-bristle broom or high-pressure water to remove the retarder.

Coverage: Approximately 400 ft² per gallon.

Packaging

Available in 5-gallon pails (18.9L).

Shelf Life

Versa Etch Extender has a shelf life of 1 year when stored in the original, tightly closed container. Protect it from contaminants such as water and dirt.

Coverage

Approximately 400 ft² per gallon.

Uses

Versa Etch Extender is ideal for extending the working time of Versa Etch Surface Retarders, especially in situations where conditions require extended drying and removal times, such as in faster-setting concrete mix designs or hot weather applications.

Standards

Compliant with U.S. and Canadian VOC regulations, including Federal EPA, OTC, LADCO, SCAQMD, and CARB.
VOC content: 100 g/l.

Cleaning

Clean tools and equipment with warm, soapy water before the product dries. Once dried, use SpecChem Berry Clean or Orange Peel for cleaning.