SpecChem > Products > SC Multi-Purpose Sealer

SC Multi-Purpose Sealer

Clear non-yellowing water-based acrylic sealer

SC Multi-Purpose Sealer is a clear, water-based, non-yellowing acrylic sealer developed to beautify and protect a wide variety of interior and exterior surfaces. Applications ranging from decorative concrete, pavers, exposed aggregate, and natural stone, to brick, quarry tile, terrazzo, and more will benefit from this durable, long lasting, easy-to-apply formula. This film-forming, low odor, multi-purpose sealer enhances the appearance of all treated surfaces with a medium gloss, satin sheen.

  • Excellent stain resistance, repels oil and grease stains
  • Seals interlocking pavers & brick pavers, locking sand in place
  • Resists mold, mildew, algae and weed growth
  • May qualify for LEED credits
  • Cleans up with Water
  • Reduces Efflorescence, fading, and freeze thaw effects
Tech Sheet
Safety Sheet
Sell Sheet

Application

For New Concrete and Exposed Aggregate

  • Apply with a sprayer or roller in a uniform thin film. For optimal results, spray application is recommended. SC Multi-Purpose Sealer requires only one coat to cure, seal, beautify, and protect.
  • For increased gloss, especially on porous substrates, a second thin coat may be applied after the first coat has dried thoroughly, typically within 6 – 8 hours.

For Existing Concrete

  • The concrete surface must be clean, dry, and free from all stains, oil, grease, dirt, and incompatible coatings before application.

Application Conditions

  • Ready-to-use. Do not dilute.
  • Apply at temperatures above 40°F and rising for best results.

Packaging

Available in 5-gallon pails and 1-gallon jugs (6 to a case).

Shelf Life

Two years from the date of manufacture when stored properly in original tightly sealed containers.

Uses

Suitable for a wide range of interior and exterior applications including water sealing and protection of decorative, stamped, colored, and hard troweled concrete, as well as pavers, slate, flagstone, quarry tile, brick, terrazzo, and exposed aggregate.

Standards

VOC content is less than 100 g/L, complying with federal VOC standards for curing and sealing compounds.

Cleaning

Clean application equipment with water if the product has not dried. For dried product, use xylene or other approved solvents.