SpecGuard
High-gloss concrete protectant/polish
Available in 1, 5, or 55 gal units
Join Our Mailing List:
Downloads:
Features & Benefits
- Durable yet breathable
- Does not require buffing, but rejuvenates with dry buffing
- Treated floors exhibit instant exceptional gloss and long-lasting scuff, scratch, and stain protection
- SpecGuard meets all federal VOC requirements (check local/regional regulations for compliance)
- High-solids concentrated formula
- Resists staining when subjected to periodic dripping of hot oils, making it ideal for use in food preparation areas
- Easy-to-apply and reapply
- Provides 24-hour stain protection to the most common stain-causing agents found in grocery stores, restaurants, warehouses, and distribution centers
Description
A multi-component, water-based polymeric protectant that improves the appearance and durability of concrete floors.
SpecGuard incorporates a cross-linking nano-technology that aids penetration and adhesion creating a tough, stain-resistant coating.
SpecGuard also contains UV absorbers that enable it to protect colored or dyed concrete against UV degradation.
SpecGuard can be used alone or in combination with a reactive sealer such as SpecHard or LithSeal SC to give concrete floors a glossy finish, harder surface, and protective chemically resistant seal.
Resources
 |
Euclid/Tamms | BASF | W.R. Meadows | Dayton | Misc. | Misc. | Misc. | Misc. | Misc. | Misc. |
|---|---|---|---|---|---|---|---|---|---|---|
| Cure Hard | Eucosil | MasterKure HD 110 WB | Med-Cure | J-13 | L&M Chem Hard | L&M Cure | ChemMasters Chemisil | Nox-Crete Bro-Cure | Kaufman Silicure | Lambert Guardseal |
| Spec-O-Lith | SurfHard | Lapidolith, HD 300WB | Lambert Corp. Solidus® | Vexcon StarSeal PS Clear | ||||||
| LithSeal SC | ConSolideck LS | L&M Lion Hard | Mapei Mapecrete™ Hard LI | Divergent Pentrasil NL | NoxCrete Duronox HSC | |||||
| LithSeal Lite | Ultrasil LI+ | Liqui-Hard Ultra | Pentra Hard-Densifier | ConSolideck LS CS | NoxCrete Duro-Nox LSC | |||||
| SpecGuard | Ultra Guard | Pentra-Hard Guard | (NX) DuroPolish Plus | TK-LS Hard N Guard Lithium Silicate Blend | Prosoco LS Guard | |||||
| SpecHard | Euco Diamond Hard | MasterKure HD 210 WB | Liqui-Hard | J-17 | Ashford Formula | (NX) DuroNox | L&M Seal Hard |
-
1
Prime: SpecPoxy 1000
A two-component, low-viscosity, moisture insensitive, high modulus, structural epoxy bonding adhesive and crack injection resin. SpecPoxy 1000 is 100% solids, solvent-free, low odor, and high-strength.
-
2
Level: SpecLevel PCT
A cement-based, self-leveling polishable comcrete topping designed for interior and exterior use. SpecLevel PCT produces a dense hard surface that can be diamond polished in as little as 24 hours.
-
3
Densify: LithSeal or SpecHard
A premium lithium-silicate sealer/densifier for concrete surfaces that deeply penetrates and reacts with cured concrete. Treated surfaces will remain breathable, reduce porosity, reduce dusting, reduce water permeability, and increase abrasion resistance.
-
4
Polish: SpecGuard
SpecGuard is a multi-component, water-based polymeric protectant that improves the appearance and durability of concrete floors. SpecGuard incorporates a cross-linking nano-technology, which aids penetration and adhesion creating a tough, stain-resistant coating.
-
+
For existing concrete, clean & strip using Orange Peel before steps 3-4.
An innovative solution for the toughest industrial applications. Effectively remove grease, grime, and other contaminants from architectural concrete and other surfaces. VOC compliant with a pleasant citrus odor.