Surface Shine Brown
25% solids solvent-based cure & seal (ASTM C309 compliant)
Surface Shine Brown is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Surface Shine Brown is a light brown pigmented acrylic sealer that dries to a medium to light brown finish.
- Minimizes efflorescence
- Beautifies and protects concrete and exposed aggregate
- Will not yellow under extreme UV exposure
- Acts as a binder to minimize aggregate pop-out
- Protects sealed surfaces from damaging effects of de-icing salts and acid rain
- Provides resistance to abrasion and a wide range of chemicals and oils
Application
For New Concrete:
- Apply as soon as surface water has evaporated and the concrete can be worked without being marred. Apply uniformly. For enhanced curing and sealing protection, a second coat can be applied at 400 sq ft per gallon after the first coat has thoroughly dried.
For Existing Concrete:
- Surfaces must be clean, dry, or slightly damp, and free from all stains, oil, grease, dirt, and incompatible coatings. Application of Surface Shine Brown revitalizes existing concrete, brick, or terrazzo floors, making them brighter and easier to maintain.
Application Tips:
- Ready to use. Do not dilute. Best applied with a sprayer for uniform thin films. Two thin coats recommended, never a single heavy coat. Avoid puddles and adhere to recommended coverage rates.
Packaging
Available in 55-gallon drums and 5-gallon pails.
Shelf Life
Two years from the date of manufacture when stored in the original tightly closed containers. Avoid contamination by water, dirt, or other materials.
Coverage
- Curing: 300 – 400 sq ft per gallon
- Dustproofing and Sealing: 400 – 600 sq ft per gallon
- Aged Concrete: 400 – 600 sq ft per gallon
Standards
- Meets ASTM C-1315 and ASTM C 309, Type 1, Classes A & B.
- Meets V.O.C. emission requirements (EPA limit < 700 g/L) for curing and sealing compounds.